A free HIIT and Tabata timer with big, easy-to-read numbers and sound cues. Pick a preset or set your own work, rest and rounds, then press Start.
How this works
Set a work period, a rest period and the number of rounds, or pick a preset. A short countdown gives you time to get in position. Beeps mark the last three seconds of each phase and every switch between work and rest, so you can train without watching the screen.
Tabata is 20 seconds of all-out effort and 10 seconds of rest, repeated 8 times: four minutes in total.
Stop exercising and rest if you feel pain, dizziness or unusual shortness of breath. Check with your doctor before starting a new exercise program.
How long should HIIT intervals be?
There is no single right answer, and that is the point of an interval timer. Set a work period, a rest period and a number of rounds, or pick a preset, then press Start. A short countdown gives you time to get into position, and beeps sound in the last three seconds of each phase and at every switch between work and rest.
The best interval length depends on how hard you want each effort to be. Short, very hard bursts need generous rest. Longer, moderate efforts can run on shorter breaks.
Work-to-rest ratios explained
| Ratio | Example | How it feels | Good for |
|---|---|---|---|
| 1:3 or more | 15 s work, 45 s rest | Near-maximal sprints with full recovery | Speed and power |
| 1:2 | 20 s work, 40 s rest | Hard but manageable | Beginners starting HIIT |
| 1:1 | 30 s work, 30 s rest | Steady, sustained effort | General conditioning |
| 2:1 | 20 s work, 10 s rest | Rest never feels long enough | Tabata and advanced circuits |
Tabata is the best-known 2:1 protocol: 20 seconds all-out, 10 seconds rest, 8 rounds, 4 minutes total. It comes from a 1996 study by Izumi Tabata, whose subjects rode exercise bikes at roughly 170% of their VO2 max. Most “Tabata” classes are far gentler than that, and that’s fine for everyday training.
Sample interval workouts
Warm up for 5 to 10 minutes before any of these, and cool down with a few minutes of easy movement afterward.
| Workout | Timer settings | What to do |
|---|---|---|
| Beginner bodyweight | 30 s work, 30 s rest, 10 rounds | Alternate squats, knee push-ups, glute bridges, marching in place |
| Classic Tabata | 20 s work, 10 s rest, 8 rounds | One move only: burpees, bike sprints or jump squats |
| Double Tabata | 20 s work, 10 s rest, 16 rounds | Alternate mountain climbers and squat jumps |
| Bike sprints | 30 s work, 90 s rest, 6 rounds | Hard sprint, then very easy spin |
| Run-walk intervals | 60 s work, 90 s rest, 8 rounds | Jog or run, then walk |
The bike session suits a home trainer well; the stationary bike guide has more beginner rides. New runners can follow the 8-week jogging plan and use this timer for its run-walk blocks. If you’d rather not plan the moves, the no-equipment home workout builds a circuit you can drop into the work periods.
How hard and how often
During true high-intensity work your breathing should be too heavy to hold a conversation. If you want a number, the heart rate zone calculator shows the upper zones that HIIT targets.
Two or three HIIT sessions a week is plenty for most people, with easier days in between. More is not better here: quality drops fast when you’re tired, and so does your form.
Progress by changing one setting at a time. Add a round, add 5 seconds of work or take 5 seconds off the rest, then hold that for a week or two before the next step.
Frequently asked questions
Is a 4-minute Tabata workout enough?
Done at genuine maximum effort, four minutes is a real workout, though it is very hard to reach that intensity. Most people get more out of two or three Tabata blocks with a minute of rest between them.
What is a good interval timer setting for beginners?
Try 20 or 30 seconds of work with equal or double rest, for 8 to 10 rounds. Once that feels comfortable, shorten the rest or add rounds.
What is the difference between HIIT and an EMOM?
HIIT intervals are fixed by time, so you work for the whole work period. In an EMOM you do a set number of reps and rest for what’s left of the minute, which the EMOM and AMRAP timer handles.
Can I use the timer without watching the screen?
Yes. It beeps before and at every switch, vibrates on phones that support it and keeps your screen awake, so a quick glance is all you need.